PAUK-V

Vibration Detector “PAUK-V”

Purpose
The purpose of the vibration detector “PAUK-V” is to detect deliberate destruction of window and door grids.


General Information

• The detector generates alarms when there is an attempt to destroy a window grid or to switch off supply voltage.
• The detector generates an alarm by individual point relay contact breaking for 3 sec. minimum.
• Maximum controlled square of a grid is 8 m2.
• The detector is equipped with a tampering button.

Distinctive Features

• The detector sensitivity can be changed.
• If necessary the end element of a receiving-control device can be connected in the detector housing.
• Low consumption current.
• Wide range of supply voltages.
• Small dimensions and light weight, original design.
• The detector cannot be demounted without the lock violation.
• Reliability and simplicity of the design.

Specifications

• Protected square of the grid is 8 m2 maximum.
• Supply voltage is 9...30V.
• Maximum consumption current in standby mode is 15mA.
• Parameters of the individual point relay:
  • maximum switched current is 0,1A;
  • maximum voltage is 45V.
• Operating temperature: -40...+50°C.
   

.